To use e-Business 6.4, an organization needs to install the Aptify e-Business 6.4 website on a web server on your network (outside the firewall to access from anywhere on the Internet or inside the firewall if you only want to support access over a Virtual Private Network (VPN) connection).
This section describes the hardware and software requirements for the server that will host the e-Business 6.4 website and the database server configurations needed for e-Business 6.4.
Note that the e-Business 6.4 web server will typically be a different server than the one that hosts the Aptify database. This is the recommended approach.
The server requirements for the e-Business 6.4 interface are described in the following topics:
Web Server Hardware Requirements
At a minimum, a system that can run Windows Server 2012 R2 and IIS 7.0 can function as an e-Business 6.4 web server. However, Aptify recommends that an organization uses a system with at least the following specifications to host the e-Business 6.4 website:
Minimum Hardware Requirements
- 8 GB RAM
- 2 vCPUs
- Two (2)300 GB Disk Drives configured
Mid-Point Hardware Requirements
- 12 GB RAM
- 4 vCPUs
High-End Hardware Requirements
- 16 GB RAM
- 8 vCPUs
Web Server Software Requirements
The following is a list of software requirements for a computer that will host e-Business 6.4:
The following operating systems are supported for the e-Business 6.4 interface:
Version: e-Business 6.4- Microsoft Windows Server 2012 R2 with the latest service pack.
- Microsoft Windows Server 2012 with the latest service pack.
- Microsoft Windows Server 2016
- Microsoft Windows Server 2019
Microsoft IIS 7.0 or higher with ASP.NET 4.0.30319 (or higher)
Note concerning IIS configurations
When a feature in the list below shows child features, only those features are required for installation. When a feature does not list any child features, all of the child features are recommended for installation.
When configuring the IIS Server 7.0, Aptify recommends that you install the following Windows features for a minimal configuration:
- Web Server (IIS)
- Web Server
- Common HTTP Features
- Health and Diagnostics
- Performance
- Security
- Application Development
- .NET Extensibility 3.5
- .NET Extensibility 4.5
- ASP.NET 3.5
- ASP.NET 4.5
- ISAPI Extensions
- ISAPI Filters
- WebSocket Protocol
- Management Tools
- IIS Management Console
- IIS 6 Management Compatibility
- IIS 6 Metabase Compatibility
- IIS 6 Metabase Compatibility
- Web Server
- Enable HTTP Compression.
- Web Server (IIS)
- To manually confirm that ASP.NET 4.0.30319 is available on the computer, follow these steps:
- Open the Internet Information Services (IIS) Manager (from Start > Control Panel > Administrative Tools).
- Select the Application Pools List from the console tree.
- Right-click on one of the application pools (for example, the DefaultAppPool) and select the Basic Settings option.
- On the Edit Application Pool dialog, confirm that 4.0.30319 appears in the .NET Framework version drop-down list.
- Microsoft .NET Framework 4.8
- This pre-requisite can be installed using the Microsoft .NET Framework Web Installer which can be downloaded at the following URL:
https://dotnet.microsoft.com/download/dotnet-framework
- This pre-requisite can be installed using the Microsoft .NET Framework Web Installer which can be downloaded at the following URL:
- ASP.NET MVC 4
- This pre-requisite can also be found at the following URL:
http://www.asp.net/mvc/mvc4
- This pre-requisite can also be found at the following URL:
- Aptify 6.4 Windows desktop application with an active Aptify Object Repository.
- CM Tool Beta is installed.
- Database Server Requirements
Your Aptify database server must meet the following basic requirements before running the Installer:
Microsoft Windows Server 2012 R2 (or higher)
- Aptify Database deployed and active in MS SQL Server.
Ensure that your Aptify e-Business 6.4 version aligns with your Aptify version, as defined in this table:
e-Business Release | Requires this Aptify Release |
---|---|
e-Business 6.4 | Aptify 6.4 |
Supported Database and Operating Systems
Database | Server Operating Systems |
---|---|
Aptify 6.4 database deployed and active in: Microsoft SQL Server 2012 Microsoft SQL Server 2014 Microsoft SQL Server 2016 Microsoft SQL Server 2019 | Windows Server 2012 – Foundation, Essentials, Standard, and Datacenter Windows Server 2012 R2 – Foundation, Essentials, Standard, and Datacenter Windows Server 2016 Windows Server 2019 |
Minimum Hardware Requirements - Database Server
Item | Requirements |
---|---|
Processor | 1 x 2.5 GHz 6-core or higher. Intel E5-2640 or higher, or AMD equivalent |
Storage | Operating System Drive Configuration: 2 x 15K RPM SAS drives in a RAID 1 mirror Example: 2 x 300GB drives = 300 GB of usable space for OS
Minimum of 5 x 15k RPM SAS drives in a RAID 5 array Example: 5 x 300GB drives = 1.1 TB of usable space for the database, logs and tempdb. |
RAM | 16GB at 1333MHz (A 64-bit OS is required to address this memory requirement) |
Network card | Gigabit Ethernet, 1000 Mbps |
Midpoint Hardware Requirements - Database Server
Item | Requirements |
---|---|
Processor | 2 x 2.2 GHz 6-core or higher. Intel E5-2660 or higher, or AMD equivalent |
Storage | Operating System Drive Configuration: 2 x 15K RPM SAS drives in a RAID 1 mirror Example: 2 x 300GB drives = 300 GB of usable space for OS Database Drive Configuration: Minimum of 8 x 15k RPM SAS drives Examples: Medium Transaction Volume: High Transaction Volume |
RAM | 32 GB at 1333MHz (A 64-bit OS is required to address this memory requirement) |
Network card | Gigabit Ethernet, 1000 Mbps |
High-end Hardware Requirements - Database Server
Item | Requirements |
---|---|
Processor | 2 x 2.9 GHz 6-core or higher. Intel E5-2690 or higher, or AMD equivalent |
Storage | Operating System Drive Configuration: 2 x 15K RPM SAS drives in a RAID 1 mirror Example: 2 x 300GB drives = 300 GB of usable space for OS Database Drive Configuration: Minimum of 14 x 15k RPM SAS drives Example: RAID 1+0: 14 x 300GB drives = 2TB of usable space for the database, SQL logs and tempdb |
RAM | 128 GB at 1600MHz or more (A 64-bit OS is required to address this memory requirement) |
Network card | Gigabit Ethernet, 1000 Mbps |
Installation Computer
The computer on which you will run the Installer must meet the following basic requirements:
- Aptify Windows desktop application installed Aptify 6.4 components and have connected at least once to the Aptify database server.
- Network connection to the database server