System Requirements for e-Business 7.0

To use e-Business 7.0, an organization needs to install the Aptify e-Business 7.0 website on a web server on your network (outside the firewall to access from anywhere on the Internet or inside the firewall if you only want to support access over a Virtual Private Network (VPN) connection).

This section describes the hardware and software requirements for the server that will host the e-Business 7.0 website and the database server configurations needed for e-Business 7.0.

Note that the e-Business 7.0 web server will typically be a different server than the one that hosts the Aptify database. This is the recommended approach.

The server requirements for the e-Business 7.0 interface are described in the following topics:

Web Server Hardware Requirements

At a minimum, a system that can run Windows Server 2012 R2 and IIS 8.5 can function as an e-Business 7.0 web server. However, Aptify recommends that an organization uses a system with at least the following specifications to host the e-Business 7.0 website:

Minimum Hardware Requirements

  • 8 GB RAM
  • 2 vCPUs
  • Two (2)300 GB Disk Drives configured

Mid-Point Hardware Requirements

  • 12 GB RAM
  • 4 vCPUs

High-End Hardware Requirements

  • 16 GB RAM
  • 8 vCPUs

Web Server Software Requirements

The following is a list of software requirements for a computer that will host e-Business 7.0:

  • The following operating systems are supported for the e-Business 7.0 interface:

    Version: e-Business 7.0
    • Microsoft Windows Server 2012 R2 with the latest service pack.
    • Microsoft Windows Server 2016
    • Microsoft Windows Server 2019
  • Microsoft IIS 8.5 or higher with ASP.NET 4.0.30319 (or higher)

    Note concerning IIS configurations

    When a feature in the list below shows child features, only those features are required for installation. When a feature does not list any child features, all of the child features are recommended for installation.

    • When configuring the IIS Server 8.5 and above, Aptify recommends that you install the following Windows features for a minimal configuration:

      • Web Server (IIS)
        • Web Server
          • Common HTTP Features
          • Health and Diagnostics
          • Performance
          • Security
          • Application Development
            • .NET Extensibility 3.5 
            • .NET Extensibility 4.5
            • ASP.NET 3.5
            • ASP.NET 4.5
            • ISAPI Extensions
            • ISAPI Filters
            • WebSocket Protocol 
        • Management Tools
          • IIS Management Console
          • IIS 6 Management Compatibility
            • IIS 6 Metabase Compatibility 
      • Enable HTTP Compression.


    • To manually confirm that ASP.NET 4.0.30319 is available on the computer, follow these steps:

      1. Open the Internet Information Services (IIS) Manager (from Start > Control Panel > Administrative Tools).
      2. Select the Application Pools List from the console tree.
      3. Right-click on one of the application pools (for example, the DefaultAppPool) and select the Basic Settings option.
      4. On the Edit Application Pool dialog, confirm that 4.0.30319 appears in the .NET Framework version drop-down list.
         
  • Microsoft .NET Framework 4.8
  • Aptify 7.0 Windows desktop application with an active Aptify Object Repository.
  • CM Tool Beta is installed.
     
  • Database Server Requirements

Your Aptify database server must meet the following basic requirements before running the Installer:

 Microsoft Windows Server 2012 R2 (or higher)

    • Aptify Database deployed and active in MS SQL Server.

Ensure that your Aptify e-Business 7.0 version aligns with your Aptify version, as defined in this table:

e-Business Release
Requires this Aptify Release
e-Business 7.0Aptify 7.0


Supported Database and Operating Systems

Database
Server Operating Systems

Aptify 7.0 database deployed and active in:

Microsoft SQL Server 2014

Microsoft SQL Server 2016

Microsoft SQL Server 2019


Windows Server 2012 R2 – Foundation, Essentials, Standard, and Datacenter

Windows Server 2016 

Windows Server 2019

Minimum Hardware Requirements - Database Server

Item
Requirements
Processor1 x 2.5 GHz 6-core or higher. Intel E5-2640 or higher, or AMD equivalent
Storage

Operating System Drive Configuration:

2 x 15K RPM SAS drives in a RAID 1 mirror

Example: 2 x 300GB drives = 300 GB of usable space for OS


Database Drive Configuration:

Minimum of 5 x 15k RPM SAS drives in a RAID 5 array

Example: 5 x 300GB drives = 1.1 TB of usable space for the database, logs and tempdb.

RAM

16GB at 1333MHz

(A 64-bit OS is required to address this memory requirement)

Network cardGigabit Ethernet, 1000 Mbps

 Midpoint Hardware Requirements - Database Server

Item
Requirements
Processor2 x 2.2 GHz 6-core or higher. Intel E5-2660 or higher, or AMD equivalent
Storage

Operating System Drive Configuration:

2 x 15K RPM SAS drives in a RAID 1 mirror

Example: 2 x 300GB drives = 300 GB of usable space for OS


Database Drive Configuration:

Minimum of 8 x 15k RPM SAS drives

Examples:

Medium Transaction Volume:
RAID 5: 8 x 300GB drives = 2TB of usable space for the database, SQL logs and tempdb

High Transaction Volume
RAID 1+0: 8 x 300GB drives = 1.2TB of usable space for the database, SQL logs and tempdb

RAM

32 GB at 1333MHz 

(A 64-bit OS is required to address this memory requirement)

Network cardGigabit Ethernet, 1000 Mbps

 High-end Hardware Requirements - Database Server

This is the base hardware for a high throughput system. For extremely high workloads, additional RAM, more CPUs and more disk spindles in the RAID array will be required. Consult with Aptify’s Infrastructure Specialists for additional information. 

Item
Requirements
Processor

2 x 2.9 GHz 6-core or higher. Intel E5-2690 or higher, or AMD equivalent

Storage

Operating System Drive Configuration:

2 x 15K RPM SAS drives in a RAID 1 mirror

Example: 2 x 300GB drives = 300 GB of usable space for OS


Database Drive Configuration:

Minimum of 14 x 15k RPM SAS drives

Example:

RAID 1+0: 14 x 300GB drives = 2TB of usable space for the database, SQL logs and tempdb

RAM

128 GB at 1600MHz or more 

(A 64-bit OS is required to address this memory requirement)

Network cardGigabit Ethernet, 1000 Mbps

Installation Computer

The computer on which you will run the Installer must meet the following basic requirements:

  • Aptify Windows desktop application installed Aptify 7.0 components and have connected at least once to the Aptify database server.
  • Network connection to the database server